On this page
- Smart-UPS and Back-UPS Pro: what the names mean
- Is the BR1500MS2 pure sine wave?
- The spec sheets side by side
- Recharge, battery and runtime
- Shutdown signals and network control
- Worked example: one home office on each unit
- What the BR1500MS2 does better
- Decision table
- What this comparison does not cover
- Frequently asked questions
The SMT1500C is the better unit for a network closet, a NAS, a heavy gaming PC or a high-altitude home, while the BR1500MS2 is the better fit for an ordinary desk. Both make a sine wave on battery, so neither is a risk for a modern PC. The choice turns on watts, recharge time, network control and altitude on one side, and on USB charging, surge-only outlets and weight on the other.
The two names sound like a small step apart, but they are not. The SMT1500C has a charger more than eight times as strong, twice the battery weight and three more ways to talk to a computer. The BR1500MS2 keeps the extras a desk wants and drops what a closet wants.
Smart-UPS and Back-UPS Pro: what the names mean
Smart-UPS is APC's business line. It is built for servers, network gear and point-of-sale counters, and it is sold with ports and slots for remote control. Back-UPS Pro is APC's top consumer line, built for a home office or a gaming desk. Our APC lineup guide maps every family. The SMT1500C is a 1500 VA class Smart-UPS tower, and the BR1500MS2 is a 1500 VA Back-UPS Pro tower.
Both are line-interactive. That means they fix mild high or low wall voltage without using the battery, and switch to battery when the voltage goes too far. Both have AVR, the circuit that does that fixing, and our page on AVR explains how it works.
Three more terms decide this comparison:
- Sine wave on battery. Wall power is a smooth curve. When the power fails, the UPS makes its own power from the battery. Cheaper units make a stepped copy of the curve, while a sine wave unit makes a smooth one. Our guide to pure sine vs simulated sine shows both shapes.
- VA and watts. VA is the size of the unit's electrical output, and watts are the real work it can do. The watt figure is the one to size against. See VA vs watts.
- Transfer time. This is the gap between wall power failing and the battery taking over, in thousandths of a second (ms).
Is the BR1500MS2 pure sine wave?
Yes. APC's BR1500MS2 datasheet lists the waveform type as "Sine wave," and the SMT1500C datasheet uses exactly the same words. So on APC's own sheets, the two units are listed alike.
If you have read that the BR1500MS2 is not pure sine, here is where that comes from. APC has sold more than one Back-UPS Pro 1500VA tower, and the older BR1500G is rated 1500 VA / 865 W, and its sheet lists "Stepped approximation to a sinewave." The BX1500M, also sold as a Back-UPS Pro 1500, says the same. A claim that was true of those models gets attached to the BR1500MS2, whose sheet says otherwise. Our page on the BR1500MS2 vs BX1500M covers that pair.
The wording on the product pages adds to the mix-up, because Schneider's SMT1500C page calls it a "pure sine wave" UPS and the BR1500MS2 sheet just says "Sine wave." The extra word reads like a hardware difference, but the datasheet entry is the same. The one real gap on paper is that the SMT1500C sheet lists harmonic distortion of "Less than 5%" and the BR1500MS2 sheet prints no distortion figure at all.
The spec sheets side by side
Every figure below comes from APC's own datasheets, and the battery weights come from APC's sheets for each cartridge.
| Spec | SMT1500C (Smart-UPS) | BR1500MS2 (Back-UPS Pro) |
|---|---|---|
| Rating | 1440 VA / 1000 W | 1500 VA / 900 W |
| Topology | Line-interactive | Line-interactive |
| Waveform type | Sine wave | Sine wave |
| Transfer time | 6 ms typical, 10 ms max | 8 ms typical, 10 ms max |
| Outlets | 8 NEMA 5-15R | 6 NEMA 5-15R + 4 surge only |
| USB charging ports | None listed | USB-A + USB-C |
| Computer connections | Serial, USB, SmartConnect Ethernet, 1 expansion slot | USB |
| Data line protection | None listed | Coax |
| Surge energy rating | 680 J | 1080 J |
| IEEE surge let-through | 0.3% | 5% |
| Replacement battery | RBC7 (24 V, 17 Ah, 25.75 lb) | APCRBC163 (12.90 lb) |
| Battery charging power | 136 W | 16 W |
| Typical recharge time | 3 h | 16 h |
| Operating altitude | 0 to 10,000 ft | 0 to 3,000 ft |
| Unit weight | 54.2 lb | 27.6 lb |
| Warranty | 3 years UPS, 2 years battery | 3 years UPS, 1 year battery |
| Equipment protection policy | Lifetime, $150,000 | Lifetime, $500,000 |
Both sheets list a multi-function LCD, a 3 to 5 year battery life, a 45 dBA noise level and ENERGY STAR UPS v2.0, and neither is rack-mountable. The SMT1500C sheet lists its 8 outlets with no surge-only group, while the BR1500MS2 sheet marks 4 of its 10 as surge only, which means those 4 go dark in an outage.
The transfer times are both normal for this class, since a desktop power supply rides through 6 ms and 8 ms on its own stored charge, and both units share a 10 ms maximum. See UPS transfer time for the detail.
Recharge, battery and runtime
Recharge is the gap with the most practical weight. APC rates the SMT1500C charger at 136 W and the BR1500MS2 charger at 16 W, and the typical recharge times follow: 3 hours against 16 hours. Where outages come in clusters, as in storm season, the SMT1500C has its battery back long before the BR1500MS2 does. APC also backs the SMT1500C battery for 2 years, against 1 year on the BR1500MS2.
The RBC7 in the SMT1500C is a 24 V, 17 Ah cartridge. Volts times amp-hours gives 408 volt-amp-hours (VAh), a rough measure of how much energy the battery stores. The 136 W charger and the 3 hour time fit that size: 408 divided by 136 is 3.
Our analysis: the battery weights point the same way
APC's sheet for the RBC7 lists 25.75 lb, and its sheet for the APCRBC163 lists 12.90 lb. Both are sealed lead-acid, and in lead-acid most of the weight is the lead that stores the energy. So the SMT1500C most likely carries close to twice the stored energy. That is an inference from weight, not an APC runtime figure.
Neither datasheet prints runtime minutes. Both link to an APC runtime graph that draws its chart in the browser, and no figures from it are quoted here. For your own load, our runtime guide shows how to estimate minutes from battery size. Our other BR1500MS2 page, CP1500PFCLCD vs BR1500MS2, works through the reseller figures for that one unit.
Shutdown signals and network control
A UPS buys minutes, and then it has to tell the computer to shut down. Both units have a USB port for that, and one USB cable signals one computer, and the BR1500MS2 stops there.
The SMT1500C adds three more paths. It has a serial port and a SmartConnect Ethernet port, which APC describes as a cloud monitoring feature whose "availability varies by terms of use." And it has one free expansion slot, which APC calls the SmartSlot. That slot takes a network management card, which can signal many computers over the network at once. Our page on network management cards and SNMP explains what a card adds.
Without a card, one machine on USB can still pass the signal to others. Our guide to Network UPS Tools (NUT) shows how, and that works with either unit.
Worked example: one home office on each unit
Take a home office with a desktop PC that draws about 300 W at the wall under load. Add a 30 W monitor, a NAS at about 45 W and a router and fiber box at about 25 W, for about 400 W on the battery outlets.
- Check the waveform. The PC has an 80 PLUS badge, so it has active PFC. Both units make a sine wave on battery, so both pass. Our page on active PFC power supplies explains why that matters.
- Check capacity. 400 W is 44% of the BR1500MS2's 900 W and 40% of the SMT1500C's 1000 W, so both have room.
- Count battery outlets. Five plugs need battery power. The BR1500MS2 has 6 battery outlets and the SMT1500C has 8, so both fit.
- Plan the shutdown. Two machines need a signal: the PC and the NAS. Run USB to the NAS and let it pass the signal to the PC over NUT, which works on either unit. Only the SMT1500C also takes a network card later.
- Picture a second outage. Suppose the power fails, comes back, and fails again two hours later. The SMT1500C is two hours into a 3 hour typical recharge, while the BR1500MS2 is two hours into 16.
For this office, either unit gets both machines shut down safely. The SMT1500C is the better pick if outages come in clusters or the NAS holds work you cannot lose. The BR1500MS2 is enough if outages are rare and you want USB charging at the desk.
Now swap in a heavier gaming PC, and suppose the planning load rises to 660 W. Our gaming PC sizing guide plans gaming loads at 70% of the watt rating, because graphics card spikes do not show on a watt meter. That is 700 W on the SMT1500C and 630 W on the BR1500MS2. 660 W fits under the first and not the second, so the SMT1500C is the right unit.
What the BR1500MS2 does better
Desk extras. The BR1500MS2 has USB-A and USB-C charging ports for a phone or tablet, and it also protects a coax line, such as cable internet or a TV feed. The SMT1500C sheet lists neither.
Surge-only outlets. Its 4 surge-only outlets suit a printer or a lamp that can go dark in an outage. Laser printers do not belong on battery outlets at all, so these are useful. See UPS for a laser printer.
Weight. At 27.6 lb it is about half the 54.2 lb SMT1500C, which matters if it sits on a shelf or moves often.
Policy ceiling. Its equipment protection policy is a lifetime $500,000, against $150,000 on the SMT1500C. That figure is the most a claim can pay, not a sum anyone receives. Our guide to UPS warranties and equipment guarantees lists the usual conditions.
Joules. It is rated at 1080 J against 680 J, but the SMT1500C sheet lists 0.3% IEEE surge let-through against 5% for the BR1500MS2. Let-through is the share of a standard test surge that reaches the outlets. So the joule figure alone does not make the BR1500MS2 the better surge protector.
Decision table
| What matters to you | Pick | Why |
|---|---|---|
| Active PFC desktop | Either | Both sheets list "Sine wave" |
| Gaming planning load between 630 and 700 W | SMT1500C | Only the 1000 W rating leaves a 70% margin |
| Outages that come in clusters | SMT1500C | 3 h typical recharge vs 16 h |
| Home above 3,000 ft | SMT1500C | Rated to 10,000 ft vs 3,000 ft |
| Shutting down several machines from a network card | SMT1500C | Only it has an expansion slot |
| Longer battery warranty | SMT1500C | 2 years vs 1 year |
| Phone charging or coax protection | BR1500MS2 | Only its sheet lists USB-A, USB-C and coax |
| A light unit for a shelf | BR1500MS2 | 27.6 lb vs 54.2 lb |
| Larger equipment policy | Not a reason alone | $500,000 vs $150,000, both ceilings with conditions |
Bottom line
Buy the SMT1500C for a closet, a NAS, a heavy gaming PC, a high-altitude home or a place where outages come in bunches. Buy the BR1500MS2 for an ordinary desk where USB charging and a lighter box matter more. Both make a sine wave, so do not choose on the waveform.
What this comparison does not cover
This page does not quote runtime minutes or prices. Neither APC sheet prints runtime, and the runtime graphs could not be read here, so the battery comparison rests on cartridge size and weight. Prices move weekly, so check them on the day. The page also does not judge how clean either sine wave looks on a scope: it goes no further than the sheets, and only the SMT1500C sheet prints a distortion figure.
All figures are for the US 120 V models only. Motor loads such as sump pumps and furnace blowers have their own sizing rules, and space heaters and laser printers do not belong on either unit's battery outlets. SmartConnect features depend on APC's terms of use, which can change. If the choice is really between a line-interactive unit and a double-conversion one, read line-interactive vs online first.
Frequently asked questions
Is the APC BR1500MS2 pure sine wave?
Yes, on battery. APC's BR1500MS2 datasheet lists the waveform type as "Sine wave", the same entry as the Smart-UPS SMT1500C sheet. The stepped-wave reputation belongs to the older BR1500G, whose sheet says "Stepped approximation to a sinewave", and to the BX1500M. Both share the Back-UPS Pro 1500VA name.
Is the SMT1500C better than the BR1500MS2 for a gaming PC?
Only if the PC is heavy. Both are sine wave, so both suit an active PFC power supply. Planned at 70% of the watt rating, the SMT1500C allows 700 W and the BR1500MS2 630 W. A PC whose planning load falls between those two belongs on the SMT1500C. Below 630 W, either unit works.
Why does the SMT1500C have fewer joules than the BR1500MS2?
APC rates the SMT1500C at 680 J and the BR1500MS2 at 1080 J. Joules say how much surge energy the parts can absorb before they wear out. The SMT1500C sheet lists 0.3% IEEE surge let-through against 5% on the BR1500MS2 sheet, so the joule figure alone does not rank them.
Can I use a BR1500MS2 above 3,000 feet?
APC's sheet lists an operating altitude of 0 to 3,000 ft for the BR1500MS2, and 0 to 10,000 ft for the SMT1500C. Denver sits at about 5,280 ft, so it is outside the BR1500MS2 rating. Above 3,000 ft, the SMT1500C is the unit whose sheet covers you.
Do the SMT1500C and BR1500MS2 use the same battery?
No. APC lists the RBC7 for the SMT1500C, a 24 V, 17 Ah cartridge that weighs 25.75 lb. It lists the APCRBC163 for the BR1500MS2, which weighs 12.90 lb. Both sheets give a 3 to 5 year battery life. The battery warranty is 2 years on the SMT1500C and 1 year on the BR1500MS2.
Sources and further reading
- APC by Schneider Electric: SMT1500C product data sheet (Nov 18, 2026) and SMT1500C product page
- APC by Schneider Electric: BR1500MS2 product data sheet (Nov 19, 2026) and BR1500MS2 product page
- APC by Schneider Electric: RBC7 replacement battery cartridge (24 V, 17 Ah) and RBC7 data sheet (25.75 lb)
- APC by Schneider Electric: APCRBC163 replacement battery cartridge and APCRBC163 data sheet (12.90 lb)
- APC by Schneider Electric: BR1500G data sheet ("Stepped approximation to a sinewave", 865 W)
- ShopSavvy: BR1500MS2 review summary ("Sine wave output")